HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 61
Remove the Phillips PM 2.0x5.0 screw, that secure the system board to the tablet.
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Disconnect the following cables from the system board: (1): Hard drive cable (2): Battery cable (3): Card reader/audio board cable (4): POGO board cable (5): Display cable (6): Vibration board cable (7): Power connector cable 3. Remove the six broadhead Phillips PM 2.0x2.0 screws (1) that secure the system board to the tablet. 4. Remove the Phillips PM 2.0x5.0 screw (2) and the Phillips PM 2.0x3.0 screw (2) that secures the system board to the tablet. Component replacement procedures 51
2.
Disconnect the following cables from the system board:
(1):
Hard drive cable
(2):
Battery cable
(3):
Card reader/audio board cable
(4):
POGO board cable
(5):
Display cable
(6):
Vibration board cable
(7):
Power connector cable
3.
Remove the six broadhead Phillips PM 2.0x2.0 screws
(1)
that secure the system board to the tablet.
4.
Remove the Phillips PM 2.0x5.0 screw
(2)
and the Phillips PM 2.0x3.0 screw
(2)
that secures the system
board to the tablet.
Component replacement procedures
51