HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 47
Display cable, Remove the display cable
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Display cable Description Display cable Spare part number 783094-001 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Remove the battery (see Battery on page 35). 7. Remove the POGO board (see POGO board on page 36). Remove the display cable: 1. Disconnect the smaller end of the cable from the system board (1). 2. Disconnect the larger end of the cable from the display panel by lifting the ZIF connector (2), and then disconnecting the cable (3). 3. Remove the cable from the clips built into the tablet (4). 4. Remove the display cable from the tablet (5). Reverse this procedure to install the display cable. Component replacement procedures 37