HP EliteBook 630 Maintenance and Service Guide - Page 47
Memory modules, remove the module
![]() |
View all HP EliteBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Memory modules To remove the memory modules, use this procedure and illustration. Table 5-2 Memory module descriptions and part numbers Description 32 GB, DDR4-3200 16 GB, DDR4-3200 8 GB, DDR4-3200 4 GB, DDR4-3200 Spare part number M09713-001 L67710-001 L46598-001 L83673-001 Before removing the memory, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Disconnect the battery cable from the system board (see Battery on page 44). If you are replacing a memory module, remove the existing memory module: 1. If present, pull the protective shielding up from the top and toward you to access the memory modules. 2. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then remove the module (2). Use the same procedure to remove all memory modules. IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. To install a memory module: Memory modules 39
![](/manual_guide/products/hewlettpackard-elitebook-630-maintenance-service-guide-aafacc1/47.png)