HP EliteBook 630 Maintenance and Service Guide - Page 64
Smart card reader, Remove the left speaker see
![]() |
View all HP EliteBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Remove the power connector cable from the computer (4). Reverse this procedure to install the power connector cable. Smart card reader To remove the smart card reader from the top cover, use this procedure and illustration. Table 6-11 Smart card reader description and part number Description Spare part number Smart card reader M21398-001 Before removing the smart card reader, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Remove the battery (see Battery on page 44). 4. Remove the left speaker (see Speaker on page 46). Remove the smart card reader: 1. Remove the four Phillips M2.0 × 2.0 screws (1) from the metal bracket covering the card reader board. 2. Disconnect the cable from the card reader (2). 56 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-elitebook-630-maintenance-service-guide-aafacc1/64.png)