HP EliteBook 630 Maintenance and Service Guide - Page 63

Power connector cable, Disconnect the battery cable from the system board see

Get HP EliteBook 630 PDF manuals and user guides View all HP EliteBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

5. Lift the side of the system board upward (3), and then pull the system board away from the connectors on the side of the computer to remove it (4). Reverse this procedure to install the system board. Power connector cable To remove the power connector cable, use this procedure and illustration. Table 6-10 Power connector cable description and part number Description Power connector cable Spare part number M21154-001 Before removing the power connector cable, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Disconnect the battery cable from the system board (see Battery on page 44). Remove the power connector cable: 1. Move the antenna cables that route over the screws. 2. Remove the two Phillips M2.5 × 4.0 screws (1) that secure the right display hinge to the computer, and then rotate the hinge off the power connector (2). 3. Disconnect the cable from the system board (3). Power connector cable 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
5.
Lift the side of the system board upward
(3)
, and then pull the system board away from the connectors
on the side of the computer to remove it
(4)
.
Reverse this procedure to install the system board.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
Table 6-10
Power connector cable description and part number
Description
Spare part number
Power connector cable
M21154-001
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
37
).
2.
Remove the bottom cover (see
Bottom cover
on page
37
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
44
).
Remove the power connector cable:
1.
Move the antenna cables that route over the screws.
2.
Remove the two Phillips M2.5 × 4.0 screws
(1)
that secure the right display hinge to the computer, and
then rotate the hinge off the power connector
(2)
.
3.
Disconnect the cable from the system board
(3)
.
Power connector cable
55