HP EliteBook 630 Maintenance and Service Guide - Page 50
Remove the Phillips M2.0 × 2.5 screw, Remove the solid-state drive
View all HP EliteBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 5-4 Solid-state drive descriptions and part numbers Description Primary solid-state drives (M.2 2280) 1 TB, PCIe, TLC 512 GB, PCIe-4 × 4, TLC 512 GB, PCIe-4 × 4, TLC, self-encrypting drive 512 GB, PCIe, value 256 GB, PCIe-4 × 4, TLC 256 GB, PCIe-4 × 4, TLC, self-encrypting drive 256 GB, PCIe, value Solid-state drive support kit Spare part number M16560-001 M17436-001 M52031-001 L85364-001 M52025-001 M52029-001 L85354-001 N00354-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Disconnect the battery cable from the system board (see Battery on page 44). Remove the solid-state drive: 1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer. 2. Pull the drive away from the socket to remove it (2). Primary M.2 2280 solid-state drive 42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts