HP EliteBook 630 Maintenance and Service Guide - Page 58
Fan, Disconnect the cable from the ZIF connector on the fingerprint reader board
![]() |
View all HP EliteBook 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Table 6-6 Fingerprint reader board description and part number (continued) Description Fingerprint reader insert (for use in models without a fingerprint reader) Spare part number N00113-001 Before removing the fingerprint reader board, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover on page 37). 3. Remove the battery (see Battery on page 44). Remove the fingerprint reader board: 1. Disconnect the cable from the ZIF connector on the fingerprint reader board (1). 2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the fingerprint reader bracket to the computer, and then remove the bracket (3). 3. Remove the fingerprint reader board from the computer (4). Fan Reverse this procedure to install the fingerprint reader board. To remove the fan, use this procedure and illustration. Table 6-7 Fan description and part number Description Fan Spare part number N09818-001 50 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-elitebook-630-maintenance-service-guide-aafacc1/58.png)