HP EliteBook 745 Maintenance and Service Guide - Page 46

Solid-state drive (SSD), Remove the Phillips M2.0 × 2.0 screw

Get HP EliteBook 745 PDF manuals and user guides View all HP EliteBook 745 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Solid-state drive (SSD) Table 5-2 Solid-state drive descriptions and part numbers Description 1 TB, PCIe, TLC 512 GB, PCIe, TLC 512 GB, PCIe, Self-encrypting drive (SED), Opal 2, TLC 512 GB, SATA-3, FIPS-140-2, TLC 512 GB, PCIe, value 512 GB, PCIe + 32 GB Optane™ Memory 256 GB, PCIe, NVMe, TLC 256 GB, PCIe, NVMe, value 256 GB, SATA-3, Opal 2, TLC 128 GB, SATA-3, TLC Spare part number L62304-001 L62301-001 L62303-001 L62767-001 L62302-001 L63374-001 L62298-001 L62299-001 L62300-001 L62297-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 34). 2. Remove the bottom cover (see Bottom cover on page 34). 3. Disconnect the battery cable from the system board (see Battery on page 46). Remove the solid-state drive: 1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board. 2. Remove the drive by pulling it away from the connector (2). IMPORTANT: When replacing the solid-state drive, remove the shielding from the old drive and install it on the replacement drive. Reverse this procedure to install the solid-state drive. 36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
Solid-state drive (SSD)
Table 5-2
Solid-state drive descriptions and part numbers
Description
Spare part number
1 TB, PCIe, TLC
L62304-001
512 GB, PCIe, TLC
L62301-001
512 GB, PCIe, Self-encrypting drive (SED), Opal 2, TLC
L62303-001
512 GB, SATA-3, FIPS-140–2, TLC
L62767-001
512 GB, PCIe, value
L62302-001
512 GB, PCIe + 32 GB Optane™ Memory
L63374-001
256 GB, PCIe, NVMe, TLC
L62298-001
256 GB, PCIe, NVMe, value
L62299-001
256 GB, SATA-3, Opal 2, TLC
L62300-001
128 GB, SATA-3, TLC
L62297-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
34
).
2.
Remove the bottom cover (see
Bottom cover
on page
34
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
46
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.0 screw
(1)
that secures the drive to the system board.
2.
Remove the drive by pulling it away from the connector
(2)
.
IMPORTANT:
When replacing the solid-state drive, remove the shielding from the old drive and install
it on the replacement drive.
Reverse this procedure to install the solid-state drive.
36
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts