HP EliteBook 745 Maintenance and Service Guide - Page 62
USB board, Remove the two Phillips M2.0 × 3.0 screws
View all HP EliteBook 745 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
USB board Table 6-4 USB board and support bracket descriptions and part numbers Description USB board (includes support bracket and cable) USB support bracket (included in the Bracket Kit) Spare part number L62735-001 L62737-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 34). 2. Remove the bottom cover (see Bottom cover on page 34). 3. Disconnect the battery cable from the system board (see Battery on page 46). Remove the USB board: 1. Disconnect the cable from the USB board (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer. 3. Lift the bracket from the board (3). 4. Remove the board from the computer (4). Reverse this procedure to install the USB board. 52 Chapter 6 Removal and replacement procedures for authorized service provider parts