HP EliteDesk 800 G4 Maintenance and Service Guide - Page 38
Drives, Drive positions, Removing and installing drives
![]() |
View all HP EliteDesk 800 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Drives For a list of available drives, see Computer major components on page 4. Drive positions Drive positions 1 3.5-inch secondary hard drive bay 2 3.5-inch primary hard drive bay 3 2.5-inch hard drive bay 4 9.5 mm slim optical drive bay NOTE: The drive configuration on your computer may be different than the drive configuration shown above. Removing and installing drives When installing drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark-blue primary SATA connector on the system board labeled SATA0. ● Connect secondary hard drives and optical drives to one of the light-blue SATA connectors on the system board labeled SATA1 and SATA2. 30 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-elitedesk-800-g4-maintenance-service-guide-f9e6a36/38.png)
Drives
For a list of available drives, see
Computer major components
on page
4
.
Drive positions
Drive positions
1
3.5-inch secondary hard drive bay
2
3.5-inch primary hard drive bay
3
2.5-inch hard drive bay
4
9.5 mm slim optical drive bay
NOTE:
The drive
configuration
on your computer may be
different
than the drive
configuration
shown above.
Removing and installing drives
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark-blue primary SATA connector on
the system board labeled SATA0.
●
Connect secondary hard drives and optical drives to one of the light-blue SATA connectors on the system
board labeled SATA1 and SATA2.
30
Chapter 4
Removal and replacement procedures