HP EliteDesk 800 G4 Maintenance and Service Guide - Page 47
other end of the data cable to one of the light-blue SATA connectors on the system board.
![]() |
View all HP EliteDesk 800 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5. Connect the power cable (1) and data cable (2) to the rear of the hard drive. NOTE: If the 3.5-inch hard drive is the primary drive, connect the other end of the data cable to the dark-blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the other end of the data cable to one of the light-blue SATA connectors on the system board. 6. Reassemble the computer. Drives 39
![](/manual_guide/products/hewlettpackard-elitedesk-800-g4-maintenance-service-guide-f9e6a36/47.png)
5.
Connect the power cable (1) and data cable (2) to the rear of the hard drive.
NOTE:
If the 3.5-inch hard drive is the primary drive, connect the other end of the data cable to the
dark-blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the
other end of the data cable to one of the light-blue SATA connectors on the system board.
6.
Reassemble the computer.
Drives
39