HP EliteDesk 800 G4 Maintenance and Service Guide - Page 57
Antennas, Press down on the tab at the top of the antenna cover
![]() |
View all HP EliteDesk 800 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Antennas The wireless antennas are secured to both the front and back of the computer behind. 1. Prepare the computer for disassembly (Preparation for disassembly on page 17). 2. Remove the access panel (Access panel on page 18). 3. Remove the front bezel (Front bezel on page 19). 4. Disconnect the antenna cables from the WLAN module (WLAN module on page 46). 5. Remove the cable from routing path on the inside wall of the chassis (1). 6. Press down on the tab at the top of the antenna cover (2), and then rotate the cover downward to remove it (3). 7. Remove the Torx T15 screw that secures the antenna to the front of the chassis (4), and then pull the antenna off the chassis and the cable out of the chassis (5). 8. Remove the antenna cable from the clips along the front of the chassis (1). Antennas 49
![](/manual_guide/products/hewlettpackard-elitedesk-800-g4-maintenance-service-guide-f9e6a36/57.png)