HP EliteDesk 800 G4 Maintenance and Service Guide - Page 46
bay 2 to lock it in place.
View all HP EliteDesk 800 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
- Install four 6-32 silver-and-blue mounting screws in the adapter bracket (two on each side of the bracket). 4. Align the mounting screws on the front of the hard drive with the slots on the drive cage and press the front of the drive down and forward into the bay (1). Then press the rear of the drive down into the drive bay (2) to lock it in place. 38 Chapter 4 Removal and replacement procedures
–
Install four 6-32 silver-and-blue mounting screws in the adapter bracket (two on each side of
the bracket).
4.
Align the mounting screws on the front of the hard drive with the slots on the drive cage and press the
front of the drive down and forward into the bay (1). Then press the rear of the drive down into the drive
bay (2) to lock it in place.
38
Chapter 4
Removal and replacement procedures