HP EliteDesk 800 G5 Maintenance and Service Guide - Page 32
Front bezel dust filter
![]() |
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Front bezel dust filter Some models are equipped with an optional front bezel dust filter. You must periodically clean the dust filter so that the dust collected on the filter does not impede air flow through the computer. NOTE: The optional front bezel dust filter is available from HP. To remove, clean, and replace the dust filter: 1. Prepare the computer for disassembly (Preparation for disassembly on page 18). 2. To remove the dust filter, use your fingers to separate the filter from the front bezel at the tab locations shown below. 3. Use a soft brush or cloth to clean dust from the filter. If heavily soiled, rinse the filter clean with water. To replace the dust filter, reverse the removal procedure. 22 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-elitedesk-800-g5-maintenance-service-guide-157a351/32.png)