HP EliteDesk 800 G5 Maintenance and Service Guide - Page 74
then align the board with the chassis screw holes., When replacing the system board
![]() |
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
8. Slide the system board toward the front of the computer to disengage the I/O panel (1), then lift the rear of the system board upward (2), and then pull it out of the computer (3). When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and then align the board with the chassis screw holes. NOTE: When replacing the system board, you must change the chassis serial number in the BIOS. 64 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-elitedesk-800-g5-maintenance-service-guide-157a351/74.png)
8.
Slide the system board toward the front of the computer to disengage the I/O panel
(1)
, then lift the rear
of the system board upward
(2)
, and then pull it out of the computer
(3)
.
When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and
then align the board with the chassis screw holes.
NOTE:
When replacing the system board, you must change the chassis serial number in the BIOS.
64
Chapter 4
Removal and replacement procedures