HP EliteDesk 800 G5 Maintenance and Service Guide - Page 60

Antennas

Page 60 highlights

Antennas The wireless antennas are secured to both the front and back of the computer behind. 1. Prepare the computer for disassembly (Preparation for disassembly on page 18). 2. Remove the access panel (Access panel on page 19). 3. Remove the front bezel (Front bezel on page 20). 4. Disconnect the antenna cables from the WLAN module (WLAN module on page 47). 5. Remove the cable from routing path on the inside wall of the chassis (1). 6. Press down on the tab at the top of the antenna cover (2), and then rotate the cover downward to remove it (3). 7. Remove the Torx T15 screw that secures the antenna to the front of the chassis (4), and then pull the antenna off the chassis and the cable out of the chassis (5). 8. Remove the antenna cable from the clips along the front of the chassis (1). 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151

Antennas
The wireless antennas are secured to both the front and back of the computer behind.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
18
).
2.
Remove the access panel (
Access panel
on page
19
).
3.
Remove the front bezel (
Front bezel
on page
20
).
4.
Disconnect the antenna cables from the WLAN module (
WLAN module
on page
47
).
5.
Remove the cable from routing path on the inside wall of the chassis
(1)
.
6.
Press down on the tab at the top of the antenna cover
(2)
, and then rotate the cover downward to
remove it
(3)
.
7.
Remove the Torx T15 screw that secures the antenna to the front of the chassis
(4)
, and then pull the
antenna off the chassis and the cable out of the chassis
(5)
.
8.
Remove the antenna cable from the clips along the front of the chassis
(1)
.
50
Chapter 4
Removal and replacement procedures