HP EliteDesk 800 G5 Maintenance and Service Guide - Page 63
Option board, Lift to disengage the board from the system board connector
![]() |
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Option board An option board can be installed near the back of the system board that provides an additional connector on the rear I/O panel. 1. Prepare the computer for disassembly (Preparation for disassembly on page 18). 2. Remove the access panel (Access panel on page 19). 3. Remove the two Phillips screws (1) that secure the board to the system board. 4. Lift to disengage the board from the system board connector, and then remove the option board from the computer (2). To reinstall the option board, reverse the removal procedure. Option board 53
![](/manual_guide/products/hewlettpackard-elitedesk-800-g5-maintenance-service-guide-157a351/63.png)
Option board
An option board can be installed near the back of the system board that provides an additional connector on
the rear I/O panel.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
18
).
2.
Remove the access panel (
Access panel
on page
19
).
3.
Remove the two Phillips screws
(1)
that secure the board to the system board.
4.
Lift to disengage the board from the system board connector, and then remove the option board from
the computer
(2)
.
To reinstall the option board, reverse the removal procedure.
Option board
53