HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 104
PC Card Assembly
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Removal and Replacement Procedures 5. Disconnect the TouchPad cable 1 from the LIF connector on the system board (Figure 5-24). 6. Remove the four black PM1.5 × 5.0 screws 2 and the PM2.0 × 5.5 screw 3 that secure the top cover to the base enclosure. 7. Lift the top cover straight up 4 and remove it from the base enclosure. Figure 5-24. Removing the Top Cover Reverse the above procedure to install the top cover. 5.15 PC Card Assembly PC Card Assembly Spare Part Number Information PC Card assembly 253936-001 5-32 Maintenance and Service Guide
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
5.
Disconnect the TouchPad cable
1
from the LIF connector on
the system board (Figure 5-24).
6.
Remove the four black PM1.5 × 5.0 screws
2
and the
PM2.0 × 5.5 screw
3
that secure the top cover to the base
enclosure.
7.
Lift the top cover straight up
4
and remove it from the base
enclosure.
Figure 5-24. Removing the Top Cover
Reverse the above procedure to install the top cover.
5.15 PC Card Assembly
PC Card Assembly
Spare Part Number Information
PC Card assembly
253936-001