HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 110
Removing the Audio Board, the system board.
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Removal and Replacement Procedures 2. Disconnect the speaker cable 1 from the audio board. 3. Remove the two PM2.0 × 5.5 screws 2 securing the audio board to the base enclosure (Figure 5-28). 4. Lift the back edge of the audio board 3 to disconnect it from the system board. 5. Lift the audio board straight up 4 and remove it from the base enclosure. Figure 5-28. Removing the Audio Board Reverse the above procedure to install the audio board. 5-38 Maintenance and Service Guide
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Disconnect the speaker cable
1
from the audio board.
3.
Remove the two PM2.0 × 5.5 screws
2
securing the audio
board to the base enclosure (Figure 5-28).
4.
Lift the back edge of the audio board
3
to disconnect it from
the system board.
5.
Lift the audio board straight up
4
and remove it from the
base enclosure.
Figure 5-28. Removing the Audio Board
Reverse the above procedure to install the audio board.