HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 105
Remove the PC Card assembly
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Removal and Replacement Procedures 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. LED cover (Section 5.8) b. Keyboard (Section 5.9) c. Heat sink (Section 5.10) d. Display (Section 5.13) e. Top cover (Section 5.14) 2. Remove the two PM2.0 × 5.5 screws 1 that secure the PC Card assembly to the base enclosure (Figure 5-25). 3. Lift the rear/right corner 2 of the assembly to disconnect it from the system board. 4. Remove the PC Card assembly 3. Figure 5-25. Removing the PC Card Assembly Maintenance and Service Guide 5-33
Removal and Replacement Procedures
Maintenance and Service Guide
5–33
1.
Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a.
LED cover (Section 5.8)
b.
Keyboard (Section 5.9)
c.
Heat sink (Section 5.10)
d.
Display (Section 5.13)
e.
Top cover (Section 5.14)
2.
Remove the two PM2.0 × 5.5 screws
1
that secure the
PC Card assembly to the base enclosure (Figure 5-25).
3.
Lift the rear/right corner
2
of the assembly to disconnect it
from the system board.
4.
Remove the PC Card assembly
3
.
Figure 5-25. Removing the PC Card Assembly