HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 81

Removing the Hard Drive from the Hard, Drive Bracket, Lift the hard drive straight up

Page 81 highlights

Removal and Replacement Procedures 7. The hard drive bracket is spared with the hard drive. If the hard drive must be removed from the hard drive bracket, perform the following steps: a. Remove the four PM2.5 × 4.0 screws 1 that secure the hard drive to the hard drive bracket (Figure 5-6). b. Lift the hard drive straight up 2 and remove it from the bracket. Figure 5-6. Removing the Hard Drive from the Hard Drive Bracket Reverse the above procedure to install the hard drive in the hard drive bracket. Maintenance and Service Guide 5-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169

Removal and Replacement Procedures
Maintenance and Service Guide
5–9
7.
The hard drive bracket is spared with the hard drive. If the
hard drive must be removed from the hard drive bracket,
perform the following steps:
a.
Remove the four PM2.5 × 4.0 screws
1
that secure the
hard drive to the hard drive bracket (Figure 5-6).
b.
Lift the hard drive straight up
2
and remove it from the
bracket.
Figure 5-6. Removing the Hard Drive from the Hard
Drive Bracket
Reverse the above procedure to install the hard drive in the hard
drive bracket.