HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 83
Removing the Expansion Cover
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Removal and Replacement Procedures 3. Remove the two PM2.0 × 5.5 screws 1 that secure the expansion cover to the base enclosure (Figure 5-7). 4. Loosen the two Phillips screws 2 that secure the expansion cover to the base enclosure. ✎ These two screws are secured to the expansion cover by C clips and should not be removed from the expansion cover. 5. Lift the left side of the expansion cover and swing it to the right 3. 6. Remove the expansion cover 4. ✎ The expansion cover is included in the Plastics Kit (spare part number 253944-001). Figure 5-7. Removing the Expansion Cover Maintenance and Service Guide 5-11
Removal and Replacement Procedures
Maintenance and Service Guide
5–11
3.
Remove the two PM2.0 × 5.5 screws
1
that secure the
expansion cover to the base enclosure (Figure 5-7).
4.
Loosen the two Phillips screws
2
that secure the expansion
cover to the base enclosure.
✎
These two screws are secured to the expansion cover by C clips
and should not be removed from the expansion cover.
5.
Lift the left side of the expansion cover and swing it to the
right
3
.
6.
Remove the expansion cover
4
.
✎
The expansion cover is included in the Plastics Kit (spare part
number 253944-001).
Figure 5-7. Removing the Expansion Cover