HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 77
Preparing the Computer for Disassembly
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Removal and Replacement Procedures 5.3 Preparing the Computer for Disassembly Perform the following steps before disassembling the computer: 1. Turn off the computer. 2. Disconnect the AC adapter and all external devices. 3. Remove the battery pack by following these steps: a. Turn the computer bottom side up with the front facing forward. b. Slide and hold the battery release latch 1 toward the left side of the computer. The back edge of the battery pack rises up (Figure 5-2). c. Swing the back edge of the battery pack up and forward 2 and remove the battery pack 3. Figure 5-2. Removing the Battery Pack Reverse the above procedure to install the battery pack. Maintenance and Service Guide 5-5
Removal and Replacement Procedures
Maintenance and Service Guide
5–5
5.3 Preparing the Computer for
Disassembly
Perform the following steps before disassembling the computer:
1.
Turn off the computer.
2.
Disconnect the AC adapter and all external devices.
3.
Remove the battery pack by following these steps:
a.
Turn the computer bottom side up with the front facing
forward.
b.
Slide and hold the battery release latch
1
toward the left
side of the computer. The back edge of the battery pack
rises up (Figure 5-2).
c.
Swing the back edge of the battery pack up and
forward
2
and remove the battery pack
3
.
Figure 5-2. Removing the Battery Pack
Reverse the above procedure to install the battery pack.