HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 85
Expansion Board Removing the Modem Board
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Removal and Replacement Procedures 2. Turn the computer bottom side up with the front facing forward. 3. Remove the expansion cover as described in the Memory Expansion Board Section (Section 5.3). 4. Disconnect the modem cable from the modem board 1 (Figure 5-9). 5. Spread the retaining tabs 2 on each side of the modem board. The board releases and rests at an angle. 6. Remove the modem board by pulling it away from the socket at an angle 3. Figure 5-9. Removing the Modem Board Reverse the above procedure to install a modem board. Maintenance and Service Guide 5-13
Removal and Replacement Procedures
Maintenance and Service Guide
5–13
2.
Turn the computer bottom side up with the front facing
forward.
3.
Remove the expansion cover as described in the Memory
Expansion Board Section (Section 5.3).
4.
Disconnect the modem cable from the modem board
1
(Figure 5-9).
5.
Spread the retaining tabs
2
on each side of the modem board.
The board releases and rests at an angle.
6.
Remove the modem board by pulling it away from the socket
at an angle
3
.
Figure 5-9. Removing the Modem Board
Reverse the above procedure to install a modem board.