HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 95
LED cover Heat sink
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removal and Replacement Procedures 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. LED cover (Section 5.8) b. Keyboard (Section 5.9) c. Heat sink (Section 5.10) 2. Use a flat-bladed tool to turn the processor locking screw 1 one-half turn counterclockwise (Figure 5-17). 3. Lift the processor straight up and remove it 2. ✎ Make sure the gold triangle 3 is in the upper right corner when installing the processor. Figure 5-17. Removing the Processor Reverse the above procedure to install the processor. Maintenance and Service Guide 5-23
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
1.
Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a.
LED cover (Section 5.8)
b.
Keyboard (Section 5.9)
c.
Heat sink (Section 5.10)
2.
Use a flat-bladed tool to turn the processor locking screw
1
one-half turn counterclockwise (Figure 5-17).
3.
Lift the processor straight up and remove it
2
.
✎
Make sure the gold triangle
3
is in the upper right corner when
installing the processor.
Figure 5-17. Removing the Processor
Reverse the above procedure to install the processor.