HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 112
Speaker Assembly
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Removal and Replacement Procedures 2. Remove the four PM2.0 × 4.5 screws 1 that secure the keyboard support plate to the base enclosure (Figure 5-29). 3. Lift the left side of the plate and slide the plate to the right 2 until it clears the base enclosure, then lift the plate straight up 3 and remove it from the base enclosure. Figure 5-29. Removing the Keyboard Support Plate Reverse the above procedure to install the keyboard support plate. 5.19 Speaker Assembly ✎ The speaker assembly is included in the base enclosure (spare part number 260611-001). 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. LED cover (Section 5.8) b. Keyboard (Section 5.9) 5-40 Maintenance and Service Guide
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Remove the four PM2.0 × 4.5 screws
1
that secure the
keyboard support plate to the base enclosure (Figure 5-29).
3.
Lift the left side of the plate and slide the plate to the right
2
until it clears the base enclosure, then lift the plate straight
up
3
and remove it from the base enclosure.
Figure 5-29. Removing the Keyboard Support Plate
Reverse the above procedure to install the keyboard support plate.
5.19 Speaker Assembly
✎
The speaker assembly is included in the base enclosure (spare
part number 260611-001).
1.
Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a.
LED cover (Section 5.8)
b.
Keyboard (Section 5.9)