HP Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 118
Removing the System Board Screws, to the base enclosure.
View all HP Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removal and Replacement Procedures 5. Remove the four PM2.0 × 8.0 screws 1 that secure the left and right display supports to the base enclosure (Figure 5-33). ✎ The two screws that secure the right display support also secure the VGA chip EMI shield 2 to the base enclosure. 6. Remove the left 3 and right 4 display supports. Figure 5-33. Removing the System Board Screws 5-46 Maintenance and Service Guide
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
5.
Remove the four PM2.0 × 8.0 screws
1
that secure the left
and right display supports to the base enclosure
(Figure 5-33).
✎
The two screws that secure the right display support also secure
the VGA chip EMI shield
2
to the base enclosure.
6.
Remove the left
3
and right
4
display supports.
Figure 5-33. Removing the System Board Screws