HP Indigo 10000 B&R Drivers Troubleshooting -- Document P/N:CA493-00610 Re - Page 51

If neither the R/R1 nor the R/R2 LED is lit green, do the following

Get HP Indigo 10000 PDF manuals and user guides View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

5. In case of a servo failure, visually check that both the motor feedback connector and the motor temperature sensor are connected to the bottom of the drive at one end and to the motor at the other end. 6. In case of an error, contact your Customer Care Center. 7. If neither the R/R1 nor the R/R2 LED is lit green, do the following: a. If the LED is blinking (no enable signals), check interlocks and make sure the press is not in OFF status. Instructions 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
5.
In case of a servo failure, visually check that both the motor feedback connector and the motor
temperature sensor are connected to the bottom of the drive at one end and to the motor at the
other end.
6.
In case of an error, contact your Customer Care Center.
7.
If neither the R/R1 nor the R/R2 LED is lit green, do the following:
a.
If the LED is blinking (no enable signals), check interlocks and make sure the press is not in OFF
status.
Instructions
49