HP Jetdirect ew2500 HP Jetdirect ew2500 802.11g Wireless Print Server Setup Gu - Page 22
Use a Microsoft Windows wireless PC, Microsoft Windows XP, Vista, Server 2003, or Server 2008. - factory reset
View all HP Jetdirect ew2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To configure a wireless connection using a network (LAN) cable, verify the following: ● You have a computer with one of the following operating systems: ◦ Microsoft Windows XP, Vista, Server 2003, or Server 2008. ◦ Apple Mac OS X 10.2 or greater. ● You have installed the HP Jetdirect print server hardware and have printed an HP Jetdirect configuration page. ● (Infrastructure mode only) The wireless router, access point, or Apple base station on your network is operating properly. CAUTION: If you reset the print server to factory-default values after you configure a wireless network connection, the network connection will be lost. To reestablish a connection, you must reconfigure the print server. Use a Microsoft Windows wireless PC 1. Insert the HP Jetdirect CD-ROM. 2. When the CD-ROM utility runs, select Install. 14 Chapter 3 Make a network connection ENWW