HP LH4r HP Netserver LT 6000r Installation Guide - Page 34
Before opening the system board access panel, unplug all power cords
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 3 Opening and Closing the HP NetServer Figure 3-4. Rack Release WARNING Never attempt to open the system board access panel when the yellow LED is lit. Attempting to open the access panel when the LED is lit will cause the system to fail, and might damage the system board assembly and its components. 5. Before opening the system board access panel, unplug all power cords from the NetServer's rear panel. All power cords must be unplugged before you open the system board access panel. 6. Press down on the access panel handle's button, and rotate handle clockwise from the closed position to the open position (see Figure 3-5). 26
Chapter 3
Opening and Closing the HP NetServer
26
Figure 3-4. Rack Release
WARNING
Never attempt to open the system board access panel when the
yellow LED is lit. Attempting to open the access panel when
the LED is lit will cause the system to fail, and might damage
the system board assembly and its components.
5.
Before opening the system board access panel, unplug all power cords
from the NetServer’s rear panel.
All power cords must be unplugged
before you open the system board access panel
.
6.
Press down on the access panel handle’s button, and rotate handle
clockwise from the closed position to the open position (see Figure 3-5).