HP LH4r HP Netserver LT 6000r Installation Guide - Page 89
Step 2: Install the Slides in the Rack
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 8 Mounting the HP NetServer in an HP Rack System/E or Rack System/U server requires.) The template directs you to the second and fourth holes on the rack column that are used for mounting the slide. Mark these holes from the baseline (bottom) for future reference. 3. Hold the template against the front face of the left-rear rack column (as you are looking from behind the rack). The template directs you to second and fourth holes in the rack column. Mark them from the baseline for future reference. 4. Repeat Steps 1 through 3 for the right-front and right-rear columns. Step 2: Install the Slides in the Rack This step explains how to install the LT 6000r slides in the rack. NOTE Figure 8-3. LT 6000r Rack-Mount Slide Features To differentiate between both slides, the right-hand slide is marked with an R embossed on the outside; the left-hand slide is marked with an L. Arrows pointed up are embossed on the outside of each slide to show the correct orientation. 81