HP LaserJet M1000 Software Technical Reference - Page 75
Use Different Paper/Covers options
View all HP LaserJet M1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Table 4-1 Standard paper types and engine speed (continued) Paper type Engine speed Rough Half - 1:21 1 Throughput for continuous printing might be less than 4 pages per minute as a result of fuser heating limitations. The default setting is Plain. If you select a different setting, make sure that the correct media type is loaded in the tray selected in the Source is: setting. For more information about media types, see Media attributes. Use Different Paper/Covers options Print books that include different media types by using the Use Different Paper/Covers options. Select the Use Different Paper/Covers check box to make the following settings appear in the group box, along with associated options: ● Front Cover ● First Page ● Other Pages ● Last Page ● Back Cover To use Use Different Paper/Covers options, configure the setting for the print job. Each option for the Use Different Paper/Covers setting is described in the sections that follow this procedure. Use the following instructions to configure the setting. To configure the Use Different Paper/Covers options for a print job For each option, set a different tray by using the Source Is: drop-down menu. For some options, the Type is: drop-down menu is also available. 1. To use different paper or cover stock, select the Use Different Paper/Covers check box. A list of options appears in the dialog box. The full set of selections is visible by using the down arrow button to the right of the list to scroll. 2. To use different media for the pages within the print job, select the appropriate option (Front Cover, First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark appears to the left of the option when a setting is changed using the Source is: or Type is: dropdown menus. 3. Click OK to print. NOTE Use the same size of media for the entire print job. All options selected from the available Use Different Paper/Covers options use the size selected in the First Page settings. When you change the type and source of the paper and covers, the settings remain configured until you close the software program. Each option for the Use Different Paper/Covers setting is described in the following sections. Host-based driver features for MS Windows ENWW Driver tabs 63