HP LaserJet Pro M1130 Service Manual - Page 142
Control-panel light patterns continued, Table 2-3
View all HP LaserJet Pro M1130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Table 2-3 Control-panel light patterns (continued) Light status Error code State of the product The attention and ready lights are on. E7 E8 Fuser error Scanner error E9 Engine communication error Action 1. Turn off the product or disconnect the power cord from the product. 2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product. 3. Wait for the product to initialize. 4. If the error persists, replace the component. ◦ E7 error: fuser. See Fuser on page 79. ◦ E8 error: CIS scanner. See CIS scanner-carriage assembly on page 56. ◦ E9 error: formatter PCA. See Formatter PCA on page 68. 122 Chapter 2 Solve problems ENWW
Light status
Error code
State of the product
Action
The attention and ready lights are on.
E7
Fuser error
1.
Turn off the product or disconnect
the power cord from the product.
2.
Wait 30 seconds, and then turn
on the product or reconnect the
power cord to the product.
3.
Wait for the product to initialize.
4.
If the error persists, replace the
component.
◦
E7 error
: fuser. See
Fuser
on page
79
.
◦
E8 error
: CIS scanner. See
CIS scanner-carriage
assembly
on page
56
.
◦
E9 error
: formatter PCA.
See
Formatter PCA
on page
68
.
E8
Scanner error
E9
Engine communication error
Table 2-3
Control-panel light patterns (continued)
122
Chapter 2
Solve problems
ENWW