Home » HP Manuals » Multifunction Devices » HP LaserJet Pro M1130 » Manual Viewer

HP LaserJet Pro M1130 Service Manual - Page 178

Clean the scanner glass strip and platen

View all HP LaserJet Pro M1130 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 178 highlights

Clean the scanner glass strip and platen Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing. 1. Use the power switch to turn off the product, and then unplug the power cord from the electrical socket. 2. Open the scanner lid. 3. Clean the scanner glass and the white plastic backing with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product. 4. Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting. 5. Plug in the product, and then use the power switch to turn on the product. 158 Chapter 2 Solve problems ENWW

Section	Page
Removal and replacement	21
Introduction	22
Removal and replacement strategy	22
Electrostatic discharge	23
Required tools	23
Before performing service	24
After performing service	24
Post-service test	25
Print-quality test	25
Parts removal order	26
Pickup roller	29
Product base pickup roller	29
ADF pre-pickup arm and pickup roller	30
Remove the ADF pre-pickup arm and pickup roller	30
Reinstall the ADF pre-pickup arm and pickup roller	32
Separation pad	33
Product base separation pad	33
ADF separation pad	34
Reinstall the ADF separation pad assembly	36
Transfer roller	39
Covers	40
Paper-pickup tray (input tray)	40
Paper-delivery tray (output bin extension)	41
Left cover	42
Remove the left cover	42
Right cover	45
Remove the right cover	45
Front cover	48
Remove the front cover	48
Scanner assembly	50
Remove the scanner assembly	50
Cartridge door	53
Remove the cartridge door	53
Top cover	56
Remove the top cover	56
Rear cover	58
Remove the rear cover	58
Reinstall the rear cover	60
Scanner components	61
White plate (document backing)	61
ADF top cover	63
ADF core	65
Remove the ADF core	65
ADF tray	68
Remove the ADF tray	68
ADF base or scanner assembly lid	71
Remove the ADF base or scanner assembly lid	71
Scanner assembly bezel	73
Remove the scanner assembly bezel	73
Scanner assembly latch	75
Remove the scanner assembly latch	75
CIS scanner-carriage assembly	76
Remove the CIS scanner-carriage assembly	76
CIS scanner motor, gears, and scanner light bar	78
Remove the CIS scanner motor, gears, and scanner light bar	78
CIS scanner drive gears	81
Remove the CIS scanner drive gears	81
Main assemblies	82
Control-panel assembly	82
Remove the control-panel assembly	82
Reinstall the control-panel assembly	84
Power switch assembly	86
Remove the power switch assembly	86
Formatter PCA	88
Remove the formatter PCA	88
Fax PCA	90
Remove the Fax PCA	90
Laser/scanner assembly	91
Remove the laser/scanner assembly	91
Reinstall the laser/scanner assembly	93
Main motor	94
Remove the main motor	94
Reinstall the main-motor drive belt	98
Fuser	99
Remove the fuser	99
Reinstall the fuser	103
Pickup assembly	104
Remove the pickup assembly	104
Reinstall the pickup assembly	108
Pickup solenoid	110
Remove the pickup solenoid	110
Engine controller PCA	114
Remove the engine controller PCA	114
Reinstall the engine controller PCA	118
Solve problems	121
Solve problems checklist	122
Troubleshooting process	125
Determine the problem source	125
Power subsystem	126
Power-on checks	126
Tools for troubleshooting	127
Individual component diagnostics	127
Engine diagnostics	127
Engine-test button	127
Components tests	128
Drum rotation functional check	128
Half self-test functional check	128
Diagrams	129
Plug/jack locations	129
HP LaserJet Professional M1130 MFP series	129
HP LaserJet Professional M1210 MFP series	130
Location of connectors	131
Locations of major components	132
General timing charts	135
General circuit diagram	136
Internal print-quality test pages	137
Cleaning page	137
Configuration page	138
Print-quality troubleshooting tools	139
Repetitive defect ruler	139
Interpret control-panel light patterns (HP LaserJet Professional M1130 MFP series only)	140
Interpret control-panel messages (HP LaserJet Professional M1210 MFP series only)	143
Control-panel message types	143
Control-panel messages	143
Clear jams	146
Common causes of jams	146
Jam locations	147
Clear jams from the document feeder (HP LaserJet Professional M1210 MFP series only)	148
Clear jams from the output areas	149
Clear jams from the input tray	151
Clear jams from inside the product	153
Solve repeated jams	155
Change jam recovery	156
Solve paper-handling problems	157
Solve image-quality problems	158
Image defects table	158
General print-quality issues	158
Copy print-quality problems	162
Scan-quality problems	163
Prevent scan-quality problems	163
Solve scan-quality problems	163
Optimize and improve image quality	164
Change print density	164
Manage and configure printer drivers	164
Clean the product	165
Clean the pickup roller	165
Clean the separation pad	169
Clean the paper path	172
Clean the print-cartridge area	174
Clean the exterior	177
Clean the scanner glass strip and platen	178
Solve performance problems	179
Solve connectivity problems	180
Solve direct-connect problems	180
Solve network problems	180
Solve fax problems (HP LaserJet Professional M1210 MFP series only)	182
Fax troubleshooting checklist	182
Fax error messages	183
Alert and warning messages	183
Fax logs and reports	188
Print all fax reports	188
Print individual fax reports	189
Set the fax activity log to print automatically	189
Set the fax error report	189
Set the fax confirmation report	190
Include the first page of each fax on the fax confirmation, fax error, and last call reports	190
Change error correction and fax speed	190
Set the fax-error-correction mode	190
Change the fax speed	191
Problems sending faxes	191
Problems receiving faxes	194
Service mode functions	197
Product resets	197
Product updates	198
Parts and diagrams	199
Order parts by authorized service providers	200
Order replacement parts	200
Related documentation and software	200
Supplies part numbers	200
Customer replaceable units (CRU) kit part numbers	201
Whole-unit replacement part numbers	202
How to use the parts lists and diagrams	203
Assembly locations	204
Base product (no optional trays or accessories)	204
Assembly views	206
Assembly view, HP LaserJet Professional M1130 MFP series	206
Assembly view, HP LaserJet Professional M1210 MFP series	208
Scanner and ADF assemblies	210
Scanner assembly (1 of 2); HP LaserJet Professional M1130 MFP series	210
Scanner assembly (2 of 2); HP LaserJet Professional M1130 MFP series	212
Scanner drive assembly; HP LaserJet Professional M1130 MFP series	214
ADF/scanner assembly; HP LaserJet Professional M1210 MFP series	216
Scanner assembly; HP LaserJet Professional M1210 MFP series	218
Scanner drive assembly; HP LaserJet Professional M1210 MFP series	220
ADF assembly; HP LaserJet Professional M1210 MFP series	222
ADF top cover; HP LaserJet Professional M1210 MFP series	224
ADF core; HP LaserJet Professional M1210 MFP series	226
ADF Base; HP LaserJet Professional M1210 MFP series	228
Covers	230
Product base	230
Internal assemblies	232
Internal assemblies (1 of 3)	232
Internal assemblies (2 of 3)	234
Internal assemblies (3 of 3)	236
PCAs	238
Alphabetical parts list	240
Numerical parts list	247
Service and support	255
Hewlett-Packard limited warranty statement	256
HP's Premium Protection Warranty: LaserJet print cartridge limited warranty statement	257
End User License Agreement	258
Customer self-repair warranty service	260
Customer support	260
Repack the product	261
Service information form	262
Specifications	263
Physical specifications	264
Power consumption	264
Acoustic specifications	264
Environmental specifications	265
Regulatory information	267
FCC regulations	268
Declaration of conformity (base model)	269
Declaration of conformity (fax model)	270
Certificate of Volatility	271
Safety statements	273
Laser safety	273
Canadian DOC regulations	273
Power cord instructions	273
EMC statement (Korea)	273
Laser statement for Finland	274
GS statement (Germany)	274
Substances Table (China)	275
Restriction on Hazardous Substances statement (Turkey)	275
Additional statements for telecom (fax) products	276
EU Statement for Telecom Operation	276
New Zealand Telecom Statements	276
Additional FCC statement for telecom products (US)	276
Telephone Consumer Protection Act (US)	277
Industry Canada CS-03 requirements	277

Match case Limit results 1 per page

Clean the scanner glass strip and platen

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can

affect performance. Use the following procedure to clean the scanner glass and white plastic backing.

Use the power switch to turn off the product, and then unplug the power cord from the electrical

socket.

Open the scanner lid.

Clean the scanner glass and the white plastic backing with a soft cloth or sponge that has been

moistened with nonabrasive glass cleaner.

CAUTION:

Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the product; these can damage the product. Do not place liquids directly

on the glass or platen. They might seep and damage the product.

Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting.

Plug in the product, and then use the power switch to turn on the product.

158

Chapter 2

Solve problems

ENWW