HP LaserJet Pro MFP 4101-4104dwe User Guide - Page 112
jam error tray 1, How to Clean the Pick Rollers in HP LaserJet and Wide, Printers
![]() |
View all HP LaserJet Pro MFP 4101-4104dwe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
NOTE: To avoid jams, make sure the guides in the document feeder input tray are adjusted correctly. Remove all staples, paper clips, or tape from original documents. NOTE: Original documents that are printed on heavy, glossy paper can jam more frequently than originals that are printed on plain paper. 9. Open the document feeder and check and clean the Document Feeder Kit rollers and separation pad by removing any visible lint or dust from each of the feed rollers and the separation pad using a clean lint-free cloth moistened with warm water. View the How to Clean the Pick Rollers in HP LaserJet and PageWide Printers for detailed instructions. Figure 9-9 Clean the document feeder rollers 1 NOTE: Lift up the roller assembly to access and clean the second roller 10. If the error persists, contact your HP-authorized service or support provider, or contact customer support at www.hp.com/go/contactHP. NOTE: To avoid jams, make sure the guides in the document feeder input tray are adjusted tightly against the document. Remove all staples and paper clips from original documents. NOTE: Original documents that are printed on heavy, glossy paper can jam more frequently than originals that are printed on plain paper. 13.02 jam error tray 1 Use the following procedure to clear paper jams in Tray 1. Recommended action for customers ● 13.02 jam error in tray 1 13.02 jam error tray 1 101
![](/manual_guide/products/hewlettpackard-laserjet-pro-mfp-41014104dwe-user-guide-a41bcf1/112.png)