HP LaserJet Pro MFP 4101-4104dwe User Guide - Page 147
The following examples depict letter-size paper that has passed through the printer short edge first.
View all HP LaserJet Pro MFP 4101-4104dwe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
NOTE: The term "fusing" refers to the part of the printing process where toner is affixed to paper. The following examples depict letter-size paper that has passed through the printer short edge first. Table 9-5 Banding defects Sample Description Possible solutions Dark or light lines which repeat down the length of the page, and are wide-pitch 1. Reprint the document. and/or impulse bands. They might be sharp or soft in nature. The defect displays only in 2. Try printing from another tray. areas of fill, not in text or sections with no printed content. 3. Replace the cartridge. 4. Use a different paper type. 5. Enterprise models only: From the Home screen on the printer control panel, go to the Adjust Paper Types menu, and then choose a print mode that is designed for a slightly heavier media than what you are using. This slows the print speed and might improve the print quality. 6. If the issue persists, go to support.hp.com. Table 9-6 Black page Sample Description The entire printed page is black. Possible solutions 1. Visually inspect the cartridge to check for damage. 2. Make sure that the cartridge is installed correctly. 3. Replace the cartridge. 4. If the issue persists, go to support.hp.com. 136 Chapter 9 Solve problems