HP Latex 3200 Site Preparation Guide - Page 20

E 0.45 m (18 in) F 0.79 m (31 in) Floor surface The floor surface should have the following characteristics: ● Horizontal surface ● Solid, smooth, and level ● No holes or indentations ● Static-free surface (no carpet) ● Easy to clean ● Durable ● Free from strong vibrations ● Concrete IMPORTANT: If your printer is an HP Latex 3500/3600, take into account that holes will be drilled in the floor to anchor the printer, and installing the dual-roll center support. IMPORTANT: If your printer is an HP Latex 3800, take into account that holes will be drilled in the floor to anchor the printer, and installing the jumbo units. Lighting Whenever your printer is in operation, the print production area should be well lit to provide the operator with optimal conditions for checking the color and alignment during print production. If there is not enough natural light, artificial lighting will be required. Designing the print production area Safety installations Fire fighting equipment You must provide two fire extinguishers for the site. Make sure the extinguishers are placed where they are easily accessible in case of fire. ● A fire extinguisher certified for electrical fires must be in the print production area. ● A fire extinguisher must be placed in the substrate storage area, due to the large amount of solid combustibles (substrates). Emergency exits and first aid stations should also be considered. Optimal room layout Your printer requires enough space to perform the following tasks: ● Print ● Use the HP Internal Print Server 16 Chapter 2 Site preparation ENWW