HP MFP S900 Quick Start Guide - Page 13

Job Build Tap this to switch the job build mode on or off. Setting it to On scans a large number of originals in segments. Slow Scan Mode Tap this to switch the slow scan mode on or off. Setting it to On prevents slips or other thin paper sheets from getting jammed when they are scanned. Mixed Size Orig. Use this to switch the mixed size original mode on or off. Setting it to On scans originals of different sizes together using the automatic document feeder. Others Specify the edge erase (center erase) and erase width of the original to be sent Sends both sides of a card as a single page Select sender information for fax transmission Saves the send data on the hard disk drive of the machine. The original data placed in the other machine is retrieved by operating your machine Original Count Tap this to switch the original count setting on or off. Setting it to On sends fax after checking the scanned number of original sheets. Viewing original settings Displays the original settings on the lower center of the panel. Select among addresses recently sent to Select a destination from the transmission log screen. Call Search Number Select a destination from the search number. Global Address Search A destination is searched for in the global address book. Send Directly Sends the scanned original without saving it to the memory. Scans each facing page of a bound document Automatically performs transmission or polling reception at the specified time Prints the transaction report Temporarily saves the send data on the hard disk drive of the machine Sends a pamphlet original by splitting it by page Stamps scanned originals (optional) Use this to register and manage the data to be sent when receiving data from the other machine by polling, as well as manage the data received by confidential reception. Sends two pages as a single page This manual contains references to the fax function. However, please note that the fax function is not available in some countries and regions. FAX 13