HP MFP S900 Quick Start Guide - Page 28

SUPPLIES Standard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only HP-compatible products for the toner cartridges, finisher staple cartridge, and transparency film. For best copying results, be sure to use only HP Supplies which are designed, engineered, and tested to maximize the life and performance of HP products. Look for the Supplies label on the toner package. Storage of supplies „„ Proper storage 1. Store the supplies in a location that is: • clean and dry, • at a stable temperature, • not exposed to direct sunlight. 2. Store paper in the wrapper and lying flat. 3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misfeeds. „„ Storing toner cartridges Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge standing on end. If stored standing on end, the toner may not distribute well even after shaking the cartridge vigorously, and will remain inside the cartridge without flowing out. „„ Staple cartridge The finisher and saddle finisher require the following staple cartridge: F5A43A (for finisher and saddle-stitch finisher) Approx. 5000 per cartridge × 3 cartridges F5A46A (for saddle-stitch of saddle-stitch finisher and saddle-stitch finisher) Approx. 2000 per cartridge × 3 cartridges F5A45A (for finisher) Approx. 5000 per cartridge × 3 cartridges Supply of spare parts and consumables The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too, are available for 7 years following the termination of production. 28