HP MFP S900 Quick Start Guide - Page 5

CAUTIONS Symbols in this manual To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. Meaning of the symbols CAUTION! HOT PINCH POINT KEEP CLEAR PROHIBITED ACTIONS DO NOT DISASSEMBLE MANDATORY ACTIONS Handling precautions WARNING CAUTION Indicates a risk of human injury or property damage. If you notice smoke, a strange odor, or other abnormality, do not use the machine. If used in this condition, fire or electrical shock may result. Immediately switch off the main power and remove the power plug from the power outlet. Contact your HP or 3rd party service and support representative. Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result. Do not make any modifications to this machine. Doing so may result in personal injury or damage to the machine. Do not remove the machine casing. High-voltage parts inside the machine may cause electrical shock. Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. If the liquid spills or the object falls into the machine, fire or electrical shock may result. If a thunder storm begins, switch off the main power and remove the power plug from the outlet to prevent electrical shock and fire due to lightning. Do not look directly at the light source. Doing so may damage your eyes. Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports. Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire. The fusing unit and paper exit area are hot. When removing a misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself. When loading paper, removing a misfeed, performing maintenance, closing the front and side covers, and inserting and removing trays, take care that your fingers are not pinched. The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere. With the exception of instances provided for by law, HP bears no responsibility for any damages or loss due to the loss of stored document data. Laser information Wave length Pulse times Output power 788nm+12nm/-13nm F1J61A Normal paper mode (P/S = 300 mm/s) = (4.15 µs ± 0.017 ns) / 7 mm Heavy paper mode (P/S = 220 mm/s) = (5.659 µs ± 0.023 ns) / 7 mm F1J62A Normal paper mode (P/S = 330 mm/s) = (3.773 µs ± 0.015 ns) / 7 mm Heavy paper mode (P/S = 220 mm/s) = (5.659 µs ± 0.023 ns) / 7 mm Max 1.4 mW (LD1+LD2+LD3+LD4) „„ Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007) 5