HP MFP S900 Quick Start Guide - Page 18

COPY OUTPUT Configure the output settings for copies using Sort, Group, Offset, Staple, Punch, or Fold. Basic operations 1 Select [Output] 2 Copy output settings 3 Check the preview image  4 Start (Black & white, or color) 1 Specify the output tray 2 Select the output and paper output type 3 Specify the details of output mode Output tray settings Output tray settings Specify the destination to output copies. The output tray currently selected is indicated by an arrow. (When a finisher (100-sheet stapling) or saddle finisher (100-sheet stapling) is installed) The [Middle Tray] key can be selected. Outputs to the offset tray Outputs to the right tray If the offset, staple sort, saddle-stitch, fold, or punch function is specified, the right tray is not available. Sort/Group function This function sets the sorting method when copying a scanned original. Sorts the scanned original on a set basis, and outputs them Groups the scanned original on a page basis, and outputs them. Offset function (When a finisher or saddle finisher is installed) Select this function when you wish to output copies while shifting them set by set. Selecting the staple function clears the Offset checkmark automatically. Sort staple (When a finisher or saddle finisher is installed) This function staples the output copies and deliver them to the tray. 1 staple in back 1 staple in front 2 Staples Copies can be folded at the center, stapled, and output. This function is only available when a saddle finisher is installed. 18