HP MFP S900 Quick Start Guide - Page 7
Names Of Parts And Power Input
View all HP MFP S900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
NAMES OF PARTS AND POWER INPUT The machine has two power switches: The main power switch inside the front cover located in the lower left corner, and the [POWER] button ( ) on the operation panel. Turning on the power Keyboard Main power indicator • Turn the main power switch to the " " position. The main power indicator blinks in green. The [POWER] button ( ) does not function while the main power indicator blinks in green. • After the main power indicator lights up green, press the [POWER] button ( ). Turning off the power Turn off the power by pressing the [POWER] button ( ), then turn the main power switch to the " " position. Restarting the machine In order for some settings to take effect, the machine must be restarted. Follow the message displayed on the touch panel to restart the system (turn off the power by pressing the [POWER] button ( ) and then press it again to turn the power back on). Output tray (Center tray) * USB connector (A type) Automatic document feeder Front cover (Upper) Front cover (Lower) [POWER] button Operation panel Right tray * Bypass-tray * Tray 5 * Tray 2 Tray 3 Tray 4 Tray 1 Caution: • When turning off the main power switch, make sure that all indicators other than the main power are turned off. • In the case of a sudden main power outage, turn the power for the machine back on and then turn it off in the correct order. If you turn off the main power switch or unplug the power cord while the indicator is lit up or blinking, the hard disk drive may be damaged or data may be lost. • Turn off both the [POWER] button ( ) and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine. Main power switch Saddle finisher* Punch module * * Optional NOTE: • When using the fax always keep the main power switch in the "On" position. • In some machine operating states, restarting using the [POWER] button ( ) may not make the settings take effect. In this case, turn off the main power switch and then turn it on again. 7