HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 100
should be in the lower right corner, when installing the processor.
![]() |
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Removal and Replacement Procedures 4. Remove the heat sink and fan (Section 5.10). 5. Use a flat-bladed tool to turn the processor locking screw one-quarter turn counterclockwise 1. 6. Lift the processor straight up 2 and remove it. ✎ Note that the gold triangle 3 should be in the lower right corner when installing the processor. Removing the Processor Reverse the above procedure to install the processor. Maintenance and Service Guide 5-27
![](/manual_guide/products/hewlettpackard-nc4000-maintenance-service-guide-hp-compaq-notebook-nc4000-series-26d7a0a/100.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–27
4. Remove the heat sink and fan (Section 5.10).
5. Use a flat-bladed tool to turn the processor locking screw
one-quarter turn counterclockwise
1
.
6. Lift the processor straight up
2
and remove it.
✎
Note that the gold triangle
3
should be in the lower right corner
when installing the processor.
Removing the Processor
Reverse the above procedure to install the processor.