HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 117
One T8M2.0×4.0 screw
![]() |
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Removal and Replacement Procedures 3. Remove the following screws: ❏ Two T8M2.0×6.0 screws 1 from the rear panel ❏ One T8M2.0×4.0 screw 2 in the upper right corner of the system board ❏ One T8M2.0×4.0 screw 3 in front of the hard drive bay ❏ One T8M2.0×4.0 screw 4 in the lower left corner of the system board 4. Use a 5.0-mm socket to remove the two M2.0×9.0 standoffs 5 that secure the system board to the base enclosure. Removing the System Board Screws 5-44 Maintenance and Service Guide
![](/manual_guide/products/hewlettpackard-nc4000-maintenance-service-guide-hp-compaq-notebook-nc4000-series-26d7a0a/117.png)
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the following screws:
❏
Two T8M2.0×6.0 screws
1
from the rear panel
❏
One T8M2.0×4.0 screw
2
in the upper right corner of the
system board
❏
One T8M2.0×4.0 screw
3
in front of the hard drive bay
❏
One T8M2.0×4.0 screw
4
in the lower left corner of the
system board
4. Use a 5.0-mm socket to remove the two M2.0×9.0 standoffs
5
that secure the system board to the base enclosure.
Removing the System Board Screws