HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 120
disconnect the cable, that secures the cable to the system board
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Removal and Replacement Procedures 3. Disconnect the modem board cable 1 from the modem board. 4. Remove the two PM2.0×3.0 screws 2 that secure the modem board to the system board. 5. Lift the rear edge of the modem board 3 to disconnect it from the system board. 6. Remove the modem board. 7. If the modem board cable must be replaced, remove the tape 4 that secures the cable to the system board and disconnect the cable 5 from the system board. ✎ The modem cable is included with the modem board and is also included in the Miscellaneous Plastics Kit, spare part number 325528-001. Removing the Modem Board Reverse the above procedure to install the modem board. Maintenance and Service Guide 5-47
Removal and Replacement Procedures
Maintenance and Service Guide
5–47
3. Disconnect the modem board cable
1
from the modem
board.
4.
Remove the two PM2.0×3.0 screws
2
that secure the modem
board to the system board.
5.
Lift the rear edge of the modem board
3
to disconnect it from
the system board.
6. Remove the modem board.
7. If the modem board cable must be replaced, remove the
tape
4
that secures the cable to the system board and
disconnect the cable
5
from the system board.
✎
The modem cable is included with the modem board and is also
included in the Miscellaneous Plastics Kit, spare part number
325528-001.
Removing the Modem Board
Reverse the above procedure to install the modem board.