HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 118
Reverse the above procedure to install the system board., clears the base enclosure.
![]() |
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removal and Replacement Procedures 5. Remove the grounding tape 1 that grounds the RJ-11 and RJ-45 connectors to the base enclosure. 6. Lift the left side of the system board 2 until the battery connector 3 clears the base enclosure. 7. Slide the system board away from the base enclosure at an angle 4. Removing the System Board Reverse the above procedure to install the system board. Maintenance and Service Guide 5-45
![](/manual_guide/products/hewlettpackard-nc4000-maintenance-service-guide-hp-compaq-notebook-nc4000-series-26d7a0a/118.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
5. Remove the grounding tape
1
that grounds the RJ-11 and
RJ-45 connectors to the base enclosure.
6. Lift the left side of the system board
2
until the battery
connector
3
clears the base enclosure.
7. Slide the system board away from the base enclosure at an
angle
4
.
Removing the System Board
Reverse the above procedure to install the system board.