HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 96
to expose the heat sink, Remove the four T8 M2.0×4.0 screws
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removal and Replacement Procedures 4. Disconnect the fan cable 1 from the system board. 5. Loosen the two spring-loaded T8 M2.0×10.0 screws 2 that secure the heat sink to the base enclosure. 6. Fold back the insulator material 3 to expose the heat sink screws. 7. Remove the four T8 M2.0×4.0 screws 4 that secure the heat sink to the base enclosure. Removing the Heat Sink Screws Maintenance and Service Guide 5-23
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
4. Disconnect the fan cable
1
from the system board.
5. Loosen the two spring-loaded T8 M2.0×10.0 screws
2
that
secure the heat sink to the base enclosure.
6. Fold back the insulator material
3
to expose the heat sink
screws.
7. Remove the four T8 M2.0×4.0 screws
4
that secure the
heat sink to the base enclosure.
Removing the Heat Sink Screws