HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 91
attached and disconnect the keyboard cable, system board.
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Removal and Replacement Procedures 10. Release the zero insertion force (ZIF) connector 1 to which the pointing stick cable is attached and disconnect the pointing stick cable 2 from the system board. 11. Release the ZIF connector 3 to which the keyboard cable is attached and disconnect the keyboard cable 4 from the system board. Removing the Keyboard 12. Remove the keyboard. Reverse the above procedure to install the keyboard. 5-18 Maintenance and Service Guide
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
10. Release the zero insertion force (ZIF) connector
1
to which
the pointing stick cable is attached and disconnect the
pointing stick cable
2
from the system board.
11. Release the ZIF connector
3
to which the keyboard cable is
attached and disconnect the keyboard cable
4
from the
system board.
Removing the Keyboard
12. Remove the keyboard.
Reverse the above procedure to install the keyboard.