HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 94
the heat sink., Remove the fan.
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Removal and Replacement Procedures 4. Disconnect the fan cable 1 from the system board. 5. Remove the three PM2.0×3.0 screws 2 that secure the fan to the heat sink. 6. Remove the fan. Ä CAUTION: When installing the fan in the heat sink, make sure the fan cable is not get crimped by the screw next to the cable clip 3. If the cable is crimped and damaged, the fan will not cool the notebook internal components, which could result in damage. Removing the Fan Reverse the above procedure to install the fan. Maintenance and Service Guide 5-21
Removal and Replacement Procedures
Maintenance and Service Guide
5–21
4. Disconnect the fan cable
1
from the system board.
5. Remove the three PM2.0×3.0 screws
2
that secure the fan to
the heat sink.
6. Remove the fan.
Ä
CAUTION:
When installing the fan in the heat sink, make sure the fan
cable is not get crimped by the screw next to the cable clip
3
. If the
cable is crimped and damaged, the fan will not cool the notebook
internal components, which could result in damage.
Removing the Fan
Reverse the above procedure to install the fan.