HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 108

cables are exposed., Disconnect the speaker and microphone cables from

Page 108 highlights

Removal and Replacement Procedures 11. Lift the rear edge 1 of the top cover until it disengages from the base enclosure. 12. Slide the top cover to the right 2 until the speaker 3 and microphone 4 cables are exposed. 13. Disconnect the speaker and microphone cables from the system board. 14. Remove the top cover. Removing the Top Cover Reverse the above procedure to install the top cover. Maintenance and Service Guide 5-35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167

Removal and Replacement Procedures
Maintenance and Service Guide
5–35
11. Lift the rear edge
1
of the top cover until it disengages from
the base enclosure.
12. Slide the top cover to the right
2
until the speaker
3
and
microphone
4
cables are exposed.
13. Disconnect the speaker and microphone cables from the
system board.
14. Remove the top cover.
Removing the Top Cover
Reverse the above procedure to install the top cover.